1, The performance figures displayed on this page are the results tested in the
Yadea Laboratory. Various factors have influence on these data, such as temperature, humidity,
wind speed, load, road conditions and operating habits. Meanwhile, the selling versions in
different countries and regions vary. Please refer to the information provided by the actual
place of purchase. Yadea reserves the right to change or modify any specifications without prior
notice.
2, The 80% Charged in 10 Minutes is the Yadea Laboratory test data that the
temperature of battery cell should be between 10℃and 35℃, in order to achieve 0-80% charging in
10 minutes.
3, "Maximum 8.000 times of the battery cell cycling" is the number of battery cell
cycling testing under the condition of completing battery charging and discharging in 1 hour at
25℃ ambient temperature, as tested by the battery manufacturer.
4, "After 3.000 charging and discharging cycles of the battery system, the battery
capacity is still more than 70%" is the result of battery manufacturer's testing, under the
condition of completing the battery charging and discharging at 25℃ ambient temperature in 1
hour, after 3.000 charging and discharging cycles, the battery capacity is still more than 70%.
5, The 0 to 100 km/h in 4.9s is the result obtained by Yadea Laboratory with the
Kemper peak power 40 kW motor, at 25℃ambient temperature, with a 75kg load, maximum discharge
current larger than 155A for 10s, and the battery capacity more than 85% on a test bench.
6, The 160 km/h max. speed and 570 N·m maximum torque (tires) are the test data
from Yadea Laboratory with the Kemper peak power 40 kW motor, at 25℃ ambient temperature, with a
load of 75kg and battery capacity more than 85% on a test bench.
7, “Climbing angle is more than 30 °" is the result of the Kemper test data
conducted by Yadea Laboratory at 25 °C ambient temperature, 75kg load, fully charged battery,
and on a test bench.
8, “The highest efficiency of the controller is 98% " is the highest efficiency
achieved by the controller during test on a test bench at a voltage of 320V and a motor speed of
3000rpm in Yadea Laboratory.
9, "An irradiation width of 10m, a distance of over 100m and 50,000cd brightness"
is the test data conducted by Yadea Laboratory.
10, The product configuration, function, performance, specification and other
information involved on this page are illustrated by taking Kemper as an example. For specific
information of other versions, please refer to the specification details and specific vehicles.
11, All rights are reserved by Mforce Bike Holdings Sdn Bhd. Yadea
LOGOs are registered trademarks of Yadea or its affiliates.
Yadea reserves the rights to change or discontinue models, design, specifications,
features, price and equipment at any time without incurring any obligation in order to
continually improving quality and seeking for innovation. Yadea strongly recommends all drivers
to read the Owner's Manual and watch the Safety Video before driving: always keep in mind that
do not drink alcohol/drugs while riding. Drivers must be at the age defined in the law and
regulation in your country, and fulfill other requirements defined in the law and regulation in
your countries. For safety concern, please remember that always wear proper riding gears such as
helmet, eye protection, and other protective clothing. Passengers must be at the age defined in
the law and regulation in your country and be able to hold hand grips and plant feet while
seated. Always show respect for the local laws and regulations applicable in your country, the
environment and the rights of other people while driving. Please drive and ride only in
authorized locations and areas.
All photos and videos were taken on public area that complies with the laws or
licensed private land with owner's permission.